HP OmniBook xt6200 HP Omnibook xt6200 & vt6200 Notebook PCs - Corporate Ev - Page 150
System Devices Menu
View all HP OmniBook xt6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Troubleshooting and Maintenance Configuring the Computer System Devices Menu Setting Description PS/2 Pointing Devices Disables the internal pointing devices when an external PS/2 mouse is connected. FDD Controller Enables the floppy drive. Legacy USB Support Enables BIOS support for USB mouse, keyboard, and floppy disk drive. Internal LAN Enables the internal (wired) LAN. Mini PCI Slot 1 Enables the PCI slot normally used for a wireless LAN, which is located under the door on the bottom of unit. Mini PCI Slot 2 Enables the PCI slot sometimes used for a modem. Serial port Enables the serial port. Base I/O address Sets the I/O address. Interrupt Sets the I/O interrupt. Infrared port Enables the infrared port. Mode Sets the hardware to support FIR (Fast IR) or SIR (Standard IR) infrared communications. Base I/O address Sets the I/O address. Interrupt Sets the I/O interrupt. DMA channel Sets the DMA channel for Fast IR (FIR) mode. Parallel Port Enables the parallel port. Mode Sets the port to output only, bi-directional, EPP, or ECP. Base I/O Sets the I/O address. Interrupt Sets the I/O interrupt. DMA channel Sets the DMA channel for ECP mode. Default Auto Enabled Disabled Enabled Enabled Enabled Enabled 3F8h IRQ4 Disabled FIR 2F8h IRQ3 DMA0 Enabled ECP 378h IRQ7 DMA3 150 Corporate Evaluator's Guide