HP Pavilion xu100 HP OmniBook 500 - Reference Guide Revision 3 - Page 163
S-Registers 3Com, US Robotics
View all HP Pavilion xu100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Reference Information Modem Reference Information Command &W1 &Zn=s &Zn? Function (3Com, US Robotics) Store user profile 1 to memory Store phone number (n= 0,1,2,3) Display phone number S-Registers (3Com, US Robotics) Register S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S15 S16 S18 S19 S21 S22 S23 S25 Function (3Com, US Robotics) Number of rings before the modem auto-answers a call (0 means autoanswer is disabled and manual answer is in effect) Counts and logs the number of rings Designates the ASCII character used to indicate an escape character Designates the ASCII character used for carriage returns Designates the ASCII character used for line feeds Designates the ASCII character used for backspaces Dial tone wait time; if AT command X is set to X2 or X4, the modem ignores this register and dials as soon as it detects a dial tone (seconds) Carrier wait time (seconds) Pause in dialing time (comma in dialing string) (seconds) Carrier detect validation time (1/10 second) Delay time between lost carrier and hang up; if S10=255, the modem will not hang up when the carrier is lost; dropping DTR hangs up the modem (1/10 second) Duration of the touchtone dialing tone spacing (in milliseconds) Guard time for the escape code (1/50 second) Bitmapped register. 1=Reset on DTR loss 2=Reduced non-ARQ transmit buffer 4=Set DEL=backspace 8=Do DS0 on DTR 16=Do DS0 on Reset 128=Escape code hangup Bitmapped register. 1=MNP/V.42 disabled in V.22 2=MNP/V.42 disabled in V.22bis 4=MNP/V.42 disabled V.32, V.34 8=Disable MNP handshake 16=Disable MNP level 4 32=Disable MNP level 3 64=Unusual MNP incompatibility 128=Disable V.42 136=Disable V.42 detection phase Bitmapped test register. 2=Dial test Test timer for AT command &T - when AT&T=0, the timer is disabled (seconds) Duration for inactivity timer; S19=0 disables the timer (minutes) Sets error correction break length (1/100 second) Designates the ASCII character code for XON Designates the ASCII character code for XOFF DTR debounce time indicator (1/100 second) Range 0-255 0-255 0-127 0-127 0-127 0-127 2-255 1-255 0-255 1-255 1-255 50-255 0-255 0-255 0-255 2 0-255 0-255 0-255 0-127 0-127 0-255 Default 0 rings 0 rings 43 13 10 8 3 60 2 6 7 70 1 0 0 0 0 0 1 17 19 0 Reference Guide 163