HP Workstation xw3100 HP Workstation xw3100 - Service and Technical Reference - Page 101

Screen Message, Probable Cause, Recommended Action, Computer Setup F10 Setup.

Page 101 highlights

POST Error Messages POST Error Messages Screen Message 214-DIMM Configuration Warning Probable Cause Populated DIMM Configuration is unbalanced. 301-Keyboard Error Keyboard failure. 303-Keyboard Controller Error 304-Keyboard or System Unit Error I/O board keyboard controller. Keyboard failure. 401-Parallel Port 1 Address Assignment Conflict 402-Parallel Port 2 Address Assignment Conflict 403-Parallel Port 3 Address Assignment Conflict 404-Parallel Port Address Conflict Detected IRQ address conflicts with another device. IRQ address conflicts with another device. IRQ address conflicts with another device. Both external and internal ports are assigned to parallel port X. 410-Audio Interrupt Conflict 411-Network Interface Card Interrupt Conflict 417-Network Interface card Failure IRQ address conflicts with another device. IRQ address conflicts with another device. Failure to read MAC address information from NIC. Recommended Action 2 DIMMS - For maximum performance, place both DIMMs in the two BLACK DIMM slots. 4 DIMMS - For maximum performance, swap one DIMM in a BLUE slot with one in a BLACK slot. Reconnect keyboard with workstation turned off. Check connector for bent or missing pins. Ensure that none of the keys are depressed. Replace keyboard. Reconnect keyboard with workstation turned off. Replace the system board. Reconnect the keyboard with workstation turned off. Ensure that none of the keys are depressed. Replace keyboard. Replace system board. Reset the IRQ. Reset the IRQ. Reset the IRQ. Remove any parallel expansion cards. Clear CMOS. Reconfigure card resources and/or run Computer Setup (F10 Setup). Reset the IRQ. Reset the IRQ. Unplug AC power cord, wait 5 seconds, then reboot unit. Service and Technical Reference Guide, xw3100 C-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148

Service and Technical Reference Guide, xw3100
C–3
POST Error Messages
214-DIMM
Configuration Warning
Populated DIMM
Configuration is
unbalanced.
2 DIMMS - For maximum performance,
place both DIMMs in the two BLACK
DIMM slots.
4 DIMMS - For maximum performance,
swap one DIMM in a BLUE slot with one
in a BLACK slot.
301-Keyboard Error
Keyboard failure.
Reconnect keyboard with workstation
turned off.
Check connector for bent or missing
pins.
Ensure that none of the keys are
depressed.
Replace keyboard.
303-Keyboard
Controller Error
I/O board keyboard
controller.
Reconnect keyboard with workstation
turned off.
Replace the system board.
304-Keyboard or
System Unit Error
Keyboard failure.
Reconnect the keyboard with workstation
turned off.
Ensure that none of the keys are
depressed.
Replace keyboard.
Replace system board.
401-Parallel Port 1
Address Assignment
Conflict
IRQ address conflicts with
another device.
Reset the IRQ.
402-Parallel Port 2
Address Assignment
Conflict
IRQ address conflicts with
another device.
Reset the IRQ.
403-Parallel Port 3
Address Assignment
Conflict
IRQ address conflicts with
another device.
Reset the IRQ.
404-Parallel Port
Address Conflict
Detected
Both external and internal
ports are assigned to
parallel port X.
Remove any parallel expansion cards.
Clear CMOS.
Reconfigure card resources and/or run
Computer Setup (F10 Setup).
410-Audio Interrupt
Conflict
IRQ address conflicts with
another device.
Reset the IRQ.
411-Network Interface
Card Interrupt Conflict
IRQ address conflicts with
another device.
Reset the IRQ.
417-Network Interface
card Failure
Failure to read MAC
address information from
NIC.
Unplug AC power cord, wait 5 seconds,
then reboot unit.
POST Error Messages
Screen Message
Probable Cause
Recommended Action