HP Workstation xw3100 HP Workstation xw3100 - Service and Technical Reference - Page 82
Power Switch Assembly
View all HP Workstation xw3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Removal and Replacement Procedures 5.12 Power Switch Assembly 1. Prepare the workstation for disassembly (Section 5.1). 2. Remove the workstation access panel (Section 5.5). 3. Disconnect the power switch/LED cable from the system board. 4. Carefully cut the cable tie that secures the power switch cable to the power supply cable cable bundle. Ä CAUTION: Be careful when cutting the cable tie not to cut any cables. 5. Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the switch assembly out of the chassis 2. To install the power switch assembly, reverse the removal procedure. 5-24 338611-001 Service and Technical Reference Guide, xw3100
5–24
338611-001
Service and Technical Reference Guide, xw3100
Removal and Replacement Procedures
5.12 Power Switch Assembly
1. Prepare the workstation for disassembly (Section
5.1
).
2. Remove the workstation access panel (Section
5.5
).
3. Disconnect the power switch/LED cable from the system board.
4. Carefully cut the cable tie that secures the power switch cable to the power supply cable
cable bundle.
Ä
CAUTION:
Be careful when cutting the cable tie not to cut any cables.
5. Squeeze the switch holder retaining clips together at the front of the chassis
1
and push the
switch assembly out of the chassis
2
.
To install the power switch assembly, reverse the removal procedure.