HP Workstation xw3100 HP Workstation xw3100 - Service and Technical Reference - Page 68
Expansion Card Cage, the Smart Cover Sensor.
View all HP Workstation xw3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removal and Replacement Procedures The workstation automatically recognizes the additional memory when the workstation is turned on. To reassemble the workstation, reverse the removal procedure. ✎ If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor. For technical information on memory modules, refer to Appendix F, "Memory." 5.9 Expansion Card Cage 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock (Section 5.2). 2. Prepare the workstation for disassembly (Section 5.1). 3. Remove the workstation access panel (Section 5.5). 4. Disconnect all cables attached to the expansion cards. 5. Grasp the expansion card cage by the green labels (the cage in the workstation has two spots marked 1) and pull it straight up from the chassis. To install the card cage, reverse the removal procedures. 5-10 338611-001 Service and Technical Reference Guide, xw3100