HP rp5800 Maintenance & Service Guide HP rp5800 Retail System - Page 20
Computer Setup F10 Utility - pci serial port
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 2-4 Computer Setup-Security (continued) ◦ USB Port 3 ◦ USB Port 4 ◦ USB Port 5 ◦ USB Port 6 ● Accessory USB Ports ◦ USB Port 1 ◦ USB Port 2 Slot Security Allows you to disable any PCI or PCI Express slot. Default is enabled. Network Boot Enables/disables the computer's ability to boot from an operating system installed on a network server. (Feature available on NIC models only; the network controller must be either a PCI expansion card or embedded on the system board.) Default is enabled. System IDs Allows you to set: ● Asset tag (18-byte identifier), a property identification number assigned by the company to the computer. ● Ownership tag (80-byte identifier) displayed during POST. ● Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.) ● Keyboard locale setting for System ID entry. 10 Chapter 2 Computer Setup (F10) Utility