HP rp5800 Maintenance & Service Guide HP rp5800 Retail System - Page 72
Installing a Full-Height Expansion Card, Installing a Powered Serial Port Expansion Card
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Installing a Full-Height Expansion Card Full-height expansion cards can be installed into the riser card slots on the computer. There are two riser cards available from HP for this product. One has two PCI slots and the other has two PCI Express x1 slots. Both cards have a slot designated for the Powered Serial Port expansion card. CAUTION: The Powered Serial Port expansion card slot on the riser cards looks very similar to a PCI Express x1 expansion card slot. Do not attempt to insert a PCI Express x1 expansion card into the Powered Serial Port expansion card slot and do not attempt to insert a Powered Serial Port expansion card into a PCI Express x1 expansion card slot Figure 7-18 Riser Card Configurations Table 7-4 Riser Card Configurations No. Expansion Slots 1 PCI Expansion Card slots 2 PCI Express x1 Expansion Card slots 3 Powered Serial Expansion Card slots NOTE: Although there are three slots in each riser card, you can only install two expansion cards in the riser card: one in the top slot and one in either the middle slot or the bottom slot The bottom slot on each card (3) is designed specifically for an HP Powered Serial Port expansion card. DO NOT attempt to plug any other type of card into the bottom slot. NOTE: The following sections provide instructions for installing a Powered Serial Port expansion card. However, the procedure is basically the same for installing any full-height PCI expansion card or PC Express x1 expansion card. Installing a Powered Serial Port Expansion Card Two powered serial ports, COM 1 and COM 2, are standard on the computer. Some models have a powered serial port expansion card installed that supplies two additional powered serial ports, COM 3 62 Chapter 7 Removal and Replacement Procedures