HP rp5800 Maintenance & Service Guide HP rp5800 Retail System - Page 83
Drives, Drive Positions - primary hard drive screws
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Drives Description 16X SATA DVD±RW drive with LightScribe 16X SATA DVD-ROM drive Blu-ray BD-RW SuperMulti DL Drive with LightScribe 1 TB, 7200 rpm SATA hard drive 500 GB, 7200 rpm SATA hard drive 250 GB, 7200 rpm SATA hard drive 160 GB Solid State Drive (SSD) 80 GB Solid State Drive (SSD) Spare part number 581600-001 581599-001 617030-001 636930-001 636929-001 636927-001 646809-001 607817-001 A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive. CAUTION: Make sure personal files on the hard drive are backed up to an external storage device before removing the hard drive. Failure to do so will result in data loss. After replacing the primary hard drive, you will need to run the Restore Plus! CD to load the HP factory-installed files. Drive Positions Figure 7-35 Drive Positions Table 7-6 Drive Positions 1 3.5-inch Primary Hard Drive Bay 2 3.5-inch Secondary Hard Drive Bay 3 5.25-inch Optical Drive Bay NOTE: The drive configuration on your computer may be different than the drive configuration shown above. Drives 73