HP rp5800 Maintenance & Service Guide HP rp5800 Retail System - Page 92
Installing Primary Hard Drive Guide Screws, Removing the Hard Drive
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5. Disconnect the power cable and data cable from the back of the hard drive. 6. Press down on the green release latch next to the hard drive (1). While holding the latch down, slide the drive forward until it stops, then lift the drive up and out of the bay (2). Figure 7-45 Removing the Hard Drive 7. To install a hard drive, you must transfer the silver and blue isolation mounting guide screws from the old hard drive to the new hard drive. Figure 7-46 Installing Primary Hard Drive Guide Screws 82 Chapter 7 Removal and Replacement Procedures
5.
Disconnect the power cable and data cable from the back of the hard drive.
6.
Press down on the green release latch next to the hard drive
(1)
. While holding the latch down,
slide the drive forward until it stops, then lift the drive up and out of the bay
(2)
.
Figure 7-45
Removing the Hard Drive
7.
To install a hard drive, you must transfer the silver and blue isolation mounting guide screws
from the old hard drive to the new hard drive.
Figure 7-46
Installing Primary Hard Drive Guide Screws
82
Chapter 7
Removal and Replacement Procedures