Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 104
Not applicable to Cisco SPA 525G., G729b Dynamic Payload type.
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Configuring SIP, SPCP, and NAT Configuring SIP 4 Parameter Description AVT Dynamic Payload AVT dynamic payload type. Ranges from 96-127. Defaults to 101. INFOREQ Dynamic Payload This parameter defines the Codec Number used in the SIP messaging for the Dynamic Payload size mechanism. This number should match the number configured in the network/other party to enable the use of Dynamic Payload. The best range is 96-127 for any dynamic payload type. Defaults to blank. G726r16 Dynamic Payload G.726-16 dynamic payload type. Ranges from 96-127. Defaults to 98. NOTE Not applicable to Cisco SPA 525G. G726r24 Dynamic Payload G.726-24 dynamic payload type. Ranges from 96-127. Defaults to 97. NOTE Not applicable to Cisco SPA 525G. G726r32 Dynamic Payload G726r32 dynamic payload type. The default is 2. G726r40 Dynamic Payload G.726-40 dynamic payload type. Ranges from 96-127. Defaults to 96. NOTE Not applicable to Cisco SPA 525G. G729b Dynamic Payload G729b Dynamic Payload type. Defaults to 99. EncapRTP Dynamic Payload EncapRTP Dynamic Payload type. Defaults to 112. RTP-Start-Loopback Dynamic RTP-Start-Loopback Dynamic Payload. Defaults to 113. RTP-Start-Loopback Codec RTP-Start-Loopback Codec. Select one of following: G711u, G711a, G726-16, G726-24, G726-32, G726-40, G729a, or G723. Defaults to G711u. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 93