Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 199
Assigning Cisco SPA 500S LEDs to Phone Extensions, Cisco SPA 9000 Syntax
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Configuring the Cisco SPA 500S Attendant Console Setting Up the Cisco SPA 500S Attendant Console 9 Assigning Cisco SPA 500S LEDs to Phone Extensions By default, all 32 keys on the Cisco SPA 500S are assigned to the first extension on the IP phone (extension 101 based on the default multicast autoconfiguration). To limit the number of LEDs assigned to the first extension, use the vid=1 keyword. Then use the vid=2 keyword to assign the next set of keys to the second extension. The numeric values correspond to the default extensions on the phone as follows: • vid=1-extension 101 • vid=2-extension 102 • vid=3-extension 103 • vid=4-extension 104 • vid=5-extension 105 • vid=6-extension 106 Cisco SPA 9000 Syntax Find more complete information in the Cisco SPA 9000 Voice System Installation and Configuration Guide. The following entry enables speed dialing, BLF monitoring, and call pick up on a Cisco SPA 9000 server with: • IP address 192.168.1.101 • station name phone1 • extension 101 • Cisco SPA 500S unit/key using the phone's extension 2 Example: fnc=sd+blf+cp;sub=phone1@$PROXY;usr=101@$PROXY;nme=phone1;vid=2 Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 188