Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 196
Configuring the Cisco SPA 500S
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Configuring the Cisco SPA 500S Attendant Console Setting Up the Cisco SPA 500S Attendant Console 9 This is entered in the file sip.conf: [3500] type=friend secret=3500 callerid="spa3500" nat=no context=home mailbox=3500 Subscribecontext=home ... ... Configuring the Cisco SPA 500S Complete the configuration required for the extensions on your IP PBX and obtain the following information: • IP PBX IP address or other hostname • Phone extension numbers To configure the Cisco SPA 500S: NOTE Steps 1 through 4 are only required when the Server Type field is set to SPA9000. These steps are not required for other server types such as BroadSoft and Asterisk. STEP 1 Connect to the web UI for the phone to which the Cisco SPA 500S is connected. STEP 2 Click Admin/Advanced on the web UI page. STEP 3 Click the SIP tab. STEP 4 Select yes from the CTI Enable drop-down list. STEP 5 Click the Attendant Console tab. STEP 6 Select yes from the Unit 1 Enable drop-down list. If you have installed two Cisco SPA 500S units, also select yes from the Unit 2 Enable drop-down list. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 185