Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 37
Configuring Unused Line Keys for Call Park on the Cisco SPA 525G (MetaSwitch
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Configuring Lines and Extensions Configuring Lines 2 - sd: speed dial - ext or usr: extension or user (the usr and ext keywords are interchangeable) STEP 6 Click Submit All Changes. In this example, after this configuration, Bob can press line button 5 to dial Mark's line. Configuring Unused Line Keys for Call Park on the Cisco SPA 525G (MetaSwitch) You can configure unused line keys for call park (for the MetaSwitch softswitch) on the Cisco SPA 525G. Users can then press this line button to park a call or retrieve a parked call. To configure: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login. STEP 3 Click advanced. STEP 4 Click the Attendant Console tab. In the General section, under Server Type, choose RFC3265_4236. STEP 5 Click the Phone tab. STEP 6 Choose the line key to configure (line 5 in this example): a. From the Extension drop down list, choose Disabled. b. From the Share Call Appearance drop-down list, choose private. c. Enter the following string in the Extended Function field: fnc=prk;[email protected] where: - fnc: function - prk: call park - sub: call park orbit, or location where the call is parked. Valid value range is from 01 through 10. In this example, 5 is used. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 26