Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 40

Configuring Lines and Extensions Configuring Lines 2 STEP 4 Under Line Key LED Pattern, use the following letters to customize the fields shown in the following table: • "p" indicates "pattern": the blinking pattern of the LED • "c" indicates "color": the color of the LED • "r" indicates "red": a red-colored LED • "g" stands for "green": a green-colored LED Parameters Idle LED Remote Undefined LED Local Seized LED Remote Seized LED (applicable only to shared call appearance) Local Progressing LED Remote Progressing LED (applicable only to shared call appearance) Local Ringing LED Description Appears when the line is idle. Defaults to blank (c=r). LED pattern during the Remote Undefined state, where the shared call state is undefined (the station is still waiting for the state information from the application server). Not applicable if the call appearance is not shared. Leaving this entry blank indicates the default value of c=r;p=d. Appears when this station seizes the call appearance to prepare for a new outbound call. Defaults to blank (c=r). Appears when the shared call appearance is seized by another station. Defaults to blank (c=r; p=d). Appears when this station attempts an outgoing call on this call appearance (the called number is ringing). Defaults to blank (c=r). Appears when another station attempts an outbound call on this shared call appearance. Defaults to blank (c=r; p=d). Appears when the call appearance is ringing. Defaults to blank (c=r;p=f). Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 29