Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 291

Cisco SPA 500 Series and Wireless IP Phone Field Reference User Tab B Speed Dial Speed Dial 2 through 9: Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7, 8, or 9. Defaults to blank. NOTE Speed dial configuration has its own tab on the Cisco SPA 525G and does not appear in this section on the WIP310. Speed dial configuration from the WIP310 is done on the phone. You can also configure speed dials on the Cisco SPA 500 Series IP phones; see the User Guide for the phone for more information. Supplementary Services The IP phone provides native support of a large set of enhanced or supplementary services. All of these services are optional. Most supplementary service parameters are listed in Supplementary Services, page 252. The user can enable or disable supplementary services and other settings in this section. A supplementary service should be disabled if the user has not subscribed for it, or the service provider intends to support similar service using other means. For more star code or supplementary service information, see Configuring Supplementary Services (Star Codes), page 153. Camera Settings The Cisco SPA 525G works with the Cisco WVC2300 Wireless-G Business Internet Video Camera and the Cisco PVC2300 Business Internet Video Camera to provide simple video monitoring from your IP phone. See Entering Camera Information Into the Cisco SPA525G Web Administration Interface, page 78. Web Information Service Settings (Cisco SPA 525G) NOTE These parameters apply only to the Cisco SPA 525G. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 280