Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 296

Cisco SPA 500 Series and Wireless IP Phone Field Reference Attendant Console Status B Attendant Console Status This page provides two tabs to display the status of up to two Cisco SPA 500S units that are supported by a single IP phone: • Unit 1-Displays information about the first Cisco SPA 500S unit. • Unit 2-Displays information about the second Cisco SPA 500S unit. Each tab provides the read-only fields described in the following table: Parameter Unit Enable Subscribe Expires HW Version Unit Online Subscribe Retry Interval SW Version Key Name Type Line Station Description Displays if the Unit is enabled or disabled. Displays when the current subscription expires. After the subscription expires, the Cisco SPA 500S automatically requests a new subscription. Displays the version of the hardware. Displays whether the unit is powered on and connected or not. Displays the length of time the Cisco SPA 500S waits to try again if subscription fails. Displays the version of the software currently running on the unit. Displays the name assigned to each key (1-32) on the Cisco SPA 500S unit. Displays the function enabled for each key (1-32) on the Cisco SPA 500S unit. Displays the extension assigned to each key (1-32) on the Cisco SPA 500S unit. Displays the subscribe URI configured for each key (132) on the Cisco SPA 500S unit. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 285