Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 203

Configuring the Cisco SPA 500S Attendant Console Monitoring the Cisco SPA 500S 9 Cisco SPA 500S Unit Monitoring Notes The following table describes each parameter; both units display the same parameters. Parameter Unit Enable Subscribe Expires HW Version Unit Online Subscribe Retry Interval SW Version Key Name Type Line Station Subscribe Description Displays if the Unit is enabled or disabled. Displays when the current subscription expires. After the subscription expires, the Cisco SPA 500S automatically requests a new subscription. Displays the version of the hardware. Displays whether the unit is connected or not. Displays the length of time the Cisco SPA 500S waits to try again if subscription fails. Displays the version of the software currently running on the unit. Displays the name assigned to each key (1-32) on the Cisco SPA 500S attendant console unit. Displays the function enabled for each key (1-32) on the Cisco SPA 500S attendant console unit. Displays the extension assigned to each key (1-32) on the Cisco SPA 500S attendant console unit. Displays the subscribe URI configured for each key (132) on the Cisco SPA 500S attendant console unit. Displays the subscription status of the unit/key. The value can be Yes, Fail, or No. No indicates that the feature/function (fnc) of that line does not require a subscription (such as speed dial). Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 192