Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 236

Cisco SPA 500 Series and Wireless IP Phone Field Reference Provisioning Tab B Linksys Key System Parameters Parameter Linksys Key System Multicast Address Key System Auto Discovery Key System IP Address Force LAN Codec Description Enable or disable the Linksys Key System on the IP phone. Defaults to yes. The multicast address is used by the Cisco SPA 9000 to communicate with the Cisco SPA IP phones. Defaults to 224.168.168.168:6061. Enables or disables auto discovery of the call control server (for example, the Cisco SPA 9000). Disable this feature for teleworkers or other scenarios where multicast does not work. IP address of the call control server IP. Enter the IP address for teleworkers or other scenarios where multicast does not work. The choices are: none, G.711u, or G.711a. Defaults to none. Provisioning Tab NOTE For information about the Provisioning page, see the Cisco Small Business IP Telephony Devices Provisioning Guide. Regional Tab This section describes the fields for the following headings on the Regional tab: • Call Progress Tones, page 226 • Distinctive Ring Patterns, page 229 Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 225