Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 68

Customizing Cisco SPA and Wireless IP Phones Configuring Phone Features 3 • Connected Key List: Edit the field to add psk1|1 to the string, editing the existing softkeyname|1 to PSK1. For example, the original string: hold|1;endcall|2;conf|3;xfer|4;bxfer;confLx;xferLx;park;p hold;flash; becomes: psk|1;hold|2;endcall|3;conf|4;xfer;bxfer;confLx;xferLx; park;phold;flash STEP 5 Click Submit All Changes. The "Sales" speed dial softkey is displayed in the lower left of the screen when the phone is idle, when the phone is connected on a call, and when the phone is off hook. Configuring the Message Waiting Indicator You can configure the message waiting indicator (MWI) for separate extensions on the phone. The MWI lights based on the presence of new voicemail messages in the mailbox. However, if the indicator at the top of your Cisco SPA 500 Series IP Phone is not lighting when voice mail is left, or you are not seeing message waiting notifications on your WIP310: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Ext tab. STEP 4 Under Call Feature Settings, in the Message Waiting field, choose yes. STEP 5 Click Submit All Changes. Configuring Ring Tones You can define up to ten ring tones for a Cisco SPA 500 Series IP Phone. NOTE WIP310 ring tones are not configurable from the web administration interface. You can define: Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 57