Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 229
RTP Parameters, Max RTP ICMP Err
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Cisco SPA 500 Series and Wireless IP Phone Field Reference SIP Tab B Parameter Retry Reg RSC Description Interval to wait before the IP phone retries registration after failing during the last registration. Defaults to blank. RTP Parameters Parameter RTP Port Min RTP Port Max RTP Packet Size Max RTP ICMP Err Description Minimum port number for RTP transmission and reception. Minimum port number for RTP transmission and reception. Should define a range that contains at least 10 even number ports (twice the number of lines); for example, configure RTP port min to 16384 and RTP port max to 16402. Defaults to 16384. Maximum port number for RTP transmission and reception. Should define a range that contains at least 10 even number ports (twice the number of lines); for example, configure RTP port min to 16384 and RTP port max to 16402. Defaults to 16482. Packet size in seconds, which can range from 0.01 to 0.16. Valid values must be a multiple of 0.01 seconds. Defaults to 0.030. Number of successive ICMP errors allowed when transmitting RTP packets to the peer before the IP phone terminates the call. If value is set to 0, the IP phone ignores the limit on ICMP errors. Defaults to 0. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 218