Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 246
m = MWI Dial Tone
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
Cisco SPA 500 Series and Wireless IP Phone Field Reference Regional Tab B Parameter Feature Dial Services Codes Description These codes tell the IP phone what to do when the user is listening to the first or second dial tone. One or more *code can be configured into this parameter, such as *72, or *72|*74|*67|*82, etc. Max total length is 79 chars. This parameter applies when the user has a dial tone (first or second dial tone). Enter *code (and the following target number according to current dial plan) entered at the dial tone triggers the IP phone to call the target number prepended by the *code. For example, after user dials *72, the IP phone plays a prompt tone awaiting the user to enter a valid target number. When a complete number is entered, the IP phone sends a INVITE to *72 as in a normal call. This feature allows the proxy to process features like call forward (*72) or BLock Caller ID (*67). The *codes should not conflict with any of the other vertical service codes internally processed by the IP phone. You can empty the corresponding *code that you do not want to IP phone to process. You can add a parameter to each *code in Features Dial Services Codes to indicate what tone to play after the *code is entered, such as *72'c'|*67'p'. Below are a list of allowed tone parameters (note the use of back quotes surrounding the parameter w/o spaces) • c = Cfwd Dial Tone • d = Dial Tone • m = MWI Dial Tone • o = Outside Dial Tone • p = Prompt Dial Tone • s = Second Dial Tone • x = No tones are place, x is any digit not used above If no tone parameter is specified, the IP phone plays Prompt tone by default. If the *code is not to be followed by a phone number, such as *73 to cancel call forwarding, do not include it in this parameter. In that case, simple add that *code in the dial plan and the IP phone send INVITE *73@..... as usual when user dials *73. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 235