Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 231
SDP Payload Types, ignores the codec names in incoming SDP for standard payload types 0 - 95.
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Cisco SPA 500 Series and Wireless IP Phone Field Reference SIP Tab B Parameter Stats In BYE Description Determines whether the IP phone includes the P-RTPStat header or response to a BYE message. The header contains the RTP statistics of the current call. Select yes or no from the drop-down menu. The format of the P-RTP-Stat header is: P-RTP-State: PS=,OS=,PR=,OR=,PL=,JI=,LA=,DU=,EN=,DE=. Defaults to no. SDP Payload Types The configured dynamic payloads are used for outbound calls only where the IP phone presents the SDP offer. For inbound calls with a SDP offer, the IP phone follows the caller dynamic payload type assignments. The IP phone uses the configured codec names in its outbound SDP. The IP phone ignores the codec names in incoming SDP for standard payload types (0 - 95). For dynamic payload types, the IP phone identifies the codec by the configured codec names. Comparison is case-insensitive. Parameter AVT Dynamic Payload INFOREQ Dynamic Payload G726r16 Dynamic Payload G726r24 Dynamic Payload Description AVT dynamic payload type. Ranges from 96-127. Defaults to 101. INFOREQ dynamic payload type. Defaults to blank. G.726-16 dynamic payload type. Ranges from 96-127. Defaults to 98. NOTE Not applicable to Cisco SPA 525G/WIP310. G.726-24 dynamic payload type. Ranges from 96-127. Defaults to 97. NOTE Not applicable to Cisco SPA 525G/WIP310. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 220