Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 137
Setting Optional Network Parameters - manual
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Configuring Security, Quality, and Network Features Setting Optional Network Parameters 5 Setting Optional Network Parameters STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the System tab. STEP 4 Configure the following fields: Parameter Host Name Domain Primary DNS Secondary DNS DNS Server Order DNS Query Mode Description The host name of the phone. The network domain of the phone. However, if using LDAP, see Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 500 Series, page 67. DNS server used by the phone in addition to DHCP supplied DNS servers if DHCP is enabled; when DHCP is disabled, this is the primary DNS server. Defaults to 0.0.0.0. However, if using LDAP, see Configuring Lightweight Directory Access Protocol (LDAP) for the Cisco SPA 500 Series, page 67. DNS server used by the phone in addition to DHCP supplied DNS servers if DHCP is enabled; when DHCP is disabled, this is the secondary DNS server. Defaults to 0.0.0.0. Specifies the method for selecting the DNS server. The options are Manual, Manual/DHCP, and DHCP/Manual. Do parallel or sequential DNS Query. With parallel DNS query mode, the phone sends the same request to all the DNS servers at the same time when doing a DNS lookup, the first incoming reply is accepted by the phone. Defaults to parallel. Not available on WIP310. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 126