Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 295

Cisco SPA 500 Series and Wireless IP Phone Field Reference Attendant Console Tab (Cisco SPA 500 Series) B Parameter Subscribe Delay Unit 2 Enable Server Type Test Mode Enable Attendant Console Call Pickup Code BLF List URI Unit 1 Key 1-32 Description Length of delay before attempting to subscribe. Defaults to 1. Enables or disables the second Cisco SPA 500S unit (each IP phone can have up to two Cisco SPA 500Ss attached). Selects the type of server used (Cisco SPA 9000, BroadSoft, or Asterisk). Enables or disables test mode. When test mode is enabled, the LEDs are turned on when keys are pressed, going from off to green to red, and back to off. In test mode, when all the buttons on the Cisco SPA 500S are returned to off, all the keys become orange. The IP phone must be rebooted after the test is completed. The star code used for picking up a ringing call. Defaults to *98. Automatically configures BLF subscriptions for all users on a monitored list. See Configuring BroadSoft Busy Lamp Field Auto-Configuration, page 189. Enter a strings that define the extension and other parameters associated with each lighted button on the first Cisco SPA 500S unit. Keywords and values are case-sensitive. The configuration script is described in the "Unit/Key Configuration Scripts" section on page 186. For more information, see Chapter 9, "Configuring the Cisco SPA 500S Attendant Console.". Unit 2 See the description for Unit 1 above. Enter a strings that define the extension and other parameters associated with each lighted button on the second Cisco SPA 500S unit. Keywords and values are case-sensitive. The configuration script is described in the "Setting Up the Cisco SPA 500S Attendant Console" section on page 182. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 284