Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 276
NAT Settings, Network Settings, NAT Keep Alive Msg
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
Cisco SPA 500 Series and Wireless IP Phone Field Reference Ext Tab B NAT Settings Parameter NAT Mapping Enable NAT Keep Alive Enable NAT Keep Alive Msg NAT Keep Alive Dest Description To use externally mapped IP addresses and SIP/RTP ports in SIP messages, select yes. Otherwise, select no. Defaults to no. To send the configured NAT keep alive message periodically, select yes. Otherwise, select no. Defaults to no. Enter the keep alive message that should be sent periodically to maintain the current NAT mapping. If the value is $NOTIFY, a NOTIFY message is sent. If the value is $REGISTER, a REGISTER message without contact is sent. Defaults to $NOTIFY. Destination that should receive NAT keep alive messages. If the value is $PROXY, the messages are sent to the current or outbound proxy. Defaults to $PROXY. Network Settings Parameter SIP TOS/DiffServ Value SIP CoS Value Description TOS/DiffServ field value in UDP IP packets carrying a SIP message. Defaults to 0x68. CoS value for SIP messages. Defaults to 3. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 265