Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 66

Customizing Cisco SPA and Wireless IP Phones Configuring Phone Features 3 To configure programmable softkeys: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 In the Programmable Softkeys section, under Programmable Softkey Enable, choose yes. To configure a speed dial script, enter the following in the PSK field: fnc=sd;ext=extensionname@$PROXY;vid=outboundextnum;nme=name where fnc is the function of the key (speed dial), ext (extensionname) is the extension being dialed, vid is the extension on the calling phone from which the outbound call is sent, and name is the name of the speed dial being configured. NOTE The name field displays on the softkey on the phone display screen. Cisco recommends a maximum of 8 characters for a Cisco SPA 50X phone and 10 characters for a Cisco SPA 525G phone. If more characters are used, the label can be truncated on the phone display. To configure an XML script, enter the following in the PSK field: fnc=xml;url=http://scriptURL.xml;nme=scriptname where fnc is the function of the key (an XML script), scriptURL.xml is the URL where the script is located, and scriptname is the name of the script. NOTE The scriptname field displays on the softkey on the phone display screen. Cisco recommends a maximum of 8 characters for a Cisco SPA 50X phone and 10 characters for a Cisco SPA 525G phone. If more characters are used, the label can be truncated on the phone display. You can use macro variables in XML URLs. The following macro variables are supported: • User ID-UID1, UID2 • Display name-DISPLAYNAME1, DISPLAYNAME2 Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 55