Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 152
Resyncing a Phone, Use the following syntax to resync a phone's profile to a profile on a TFTP, HTTP
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Provisioning Basics Upgrading, Resyncing, and Rebooting Phones 6 Parameter Log_Upgrade_Success_Msg Log_Upgrade_Failure_Msg License Keys Description Syslog message issued after a firmware upgrade attempt completes successfully. The default is $PN $MAC -- Successful upgrade $SCHEME:// $SERVIP:$PORT$PATH -- $ERR Syslog message issued after a failed firmware upgrade attempt. The default is $PN $MAC -- Upgrade failed: $ERR. This field is empty. Resyncing a Phone You can resync an IP phone to a specific remote profile. The configuration of the phone you resync will match the configuration of the remote phone. The phone can be configured to resync its internal configuration state to a remote profile periodically and on power up. NOTE The phone resyncs only when it is idle. Use the following syntax to resync a phone's profile to a profile on a TFTP, HTTP, or HTTPS server: http://phone-ip-addr/admin/resync?protocol://servername[:port]/profile-pathname • Parameter following resync? defaults to the Profile Rule setting on the web server Provisioning page. • Protocol defaults to TFTP. • Server-name defaults to the host requesting the URL. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 141