Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 28

Getting Started Viewing Phone Information 1 Viewing Phone Information After you log on to the web UI (see "Using the Web Administration User Interface" section on page 11), you can check the current status of the Cisco SPA 500 Series or Wireless-G IP Phone by clicking the Info tab. The Info tab shows information about all phone extensions, including phone statistics and the registration status. All fields are read-only. See "Info Tab" section on page 197 for more information about the fields. Using IVR on the Cisco SPA 501G IP Phone The Cisco SPA 501G provides an IVR menu to perform configuration tasks and obtain information about the phone. To access the IVR menu, press the Settings button. Enter the number of the option and press #. Some menus require entering of further information or numbers. You have the following options: Number 100 110 120 130 140 150 160 170 180 220 Option Tells you if Dynamic Host Configuration Protocol (DHCP) is enabled. Recites the IP address of the phone. Recites the netmask of the phone. Recites the gateway address. Recites the MAC (hardware) address of the phone. Recites the phone software version. Recites the primary DNS server address. Recites the HTTP port on which the web server listens. Defaults to 80. Recites the IP multicast address (used by the Cisco SPA 9000 to communicate with the IP phone). Recites the method of call control (SIP or SPCP). Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 17