Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 135
Setting a Static IP Address, Configuring Security, Quality, and Network Features, Using IVR on
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Configuring Security, Quality, and Network Features Configuring Domain and Internet Settings 5 NOTE PPPoE is not applicable to WIP310. STEP 5 Click Submit All Changes. NOTE For the SPA501G, can be configured using the IVR. See the "Using IVR on the Cisco SPA 501G IP Phone" section on page 17. Setting a Static IP Address If you configured Static IP as the internet connection type: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the System tab. STEP 4 Configure the following fields: • Static IP Address-Enter the static IP address of the phone. • Netmask-Enter the subnet mask of the phone. • Gateway-Enter the IP address of the gateway. For the SPA 525G, you also have the following fields available: • LAN MTU-LAN Maximum Transmission Unit size. Default value: 1500. • Duplex Mode-Choose one of the following to configure the speed/duplex for the phone's Ethernet ports: - Auto - 10MBps/Duplex - 10MBps/Half - 100Mbps/Duplex - 100MBps/Half Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 124