Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 201

Configuring the Cisco SPA 500S Attendant Console Setting Up the Cisco SPA 500S Attendant Console 9 STEP 5 In the BLF List URI field, enter the URI to generate BLF keys: [email protected];vid=2 Where: • listname: Name of the list. • domain.com: Name of the domain. • vid: Assigns keys to the extension. By default, the SUBSCRIBE is sent when "Ext 1" is registered. You must set the "vid=" to a different value to change this behavior. For example: [email protected];vid=2 STEP 6 Click Submit All Changes. Attendant Console Parameters Parameters in the Attendant Console web page are described in the following table. For information about Unit/Key syntax, see the previous sections. . Parameter Subscribe Expires Subscribe Retry Interval Unit 1 Enable Unit 2 Enable Subscribe Delay Description Specifies how long the subscription remains valid. After the specified period of time, elapses, the Cisco SPA 500S initiates a new subscription. Defaults to 1800. Specifies the length of time to wait to try again if subscription fails. Enables or disables the first Cisco SPA 500S unit (each phone can have up to two Cisco SPA 500S units attached). Enables or disables the second Cisco SPA 500S unit (each phone can have up to two Cisco SPA 500S units attached). Length of delay before attempting to subscribe. Defaults to 1. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 190