Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 202
Monitoring the Cisco SPA 500S
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Configuring the Cisco SPA 500S Attendant Console Monitoring the Cisco SPA 500S 9 Parameter Server Type Test Mode Enable Attendant Console Call Pickup Code BLF List URI Unit 1 Key 1-32 Description Selects the type of server used (SPA9000, BroadSoft, or Asterisk). Enables or disables test mode. When test mode is enabled, the LEDs are turned on when keys are pressed, going from off to green to red, and back to off. In test mode, when all the buttons on the attendant console are returned to off, all the keys become orange. The phone must be rebooted after the test is completed. The star code used for picking up a ringing call. Defaults to *98. Automatically configures BLF subscriptions for all users on a monitored list. Enter a strings that define the extension and other parameters associated with each lighted button on the first Cisco SPA 500S unit. Keywords and values are case-sensitive. The configuration script is described in "Unit/Key Configuration Scripts" section on page 186. Monitoring the Cisco SPA 500S To display the status of the Cisco SPA 500S, click the Attendant Console Status link on the GUI. The status of each attendant console attached (Unit 1 and Unit 2) is shown. Parameters are read-only. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 191