Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 58

Customizing Cisco SPA and Wireless IP Phones Enabling Call Features 3 Enabling Paging (Intercom) The paging, or intercom feature, allows two types of paging: Single Page A user can directly contact another user by phone. If the person being paged has configured their phone to automatically accept pages (see Configuring a Phone to Automatically Accept Pages, page 47), the phone does not ring and a direct connection between the two phones is automatically established when paging is initiated. Group Paging Group Paging lets the user page all the client stations at once, or page groups of phones. If the client station is on an active call while a group page starts, the incoming page is ignored. When paging occurs, the speaker on the paged stations is automatically powered on unless the handset or headset is being used. Group page is one-way only. The paged client stations can only listen to the call from the originator. To enable paging: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 Under Supplementary Services, under Paging Serv, choose yes. STEP 5 Click Submit All Changes. Configuring a Phone to Automatically Accept Pages To configure a phone to automatically accept pages: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the User tab. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 47