Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 23
Cisco SPA 502G, WIP310, Select, Settings, Misc Settings - reviews
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Getting Started Using the Web Administration User Interface 1 NOTE If your service provider disabled access to the web UI, you must contact the service provider. If you have trouble accessing the web interface, perform the following steps: Cisco SPA 502G, Cisco SPA 504G, Cisco SPA 508G, Cisco SPA 509G: STEP 1 Press the Setup button on the phone. STEP 2 Select Network. STEP 3 Scroll to Enable Web Server and make sure that it is set to Yes. If not, press the Edit soft key and press y/n soft key to set it to Yes. STEP 4 Press OK, then press Save. Cisco SPA 501G: STEP 1 Press the Setup button on the phone. STEP 2 In the IVR menu, enter 7932. STEP 3 Press 1 to enable the web server, then press #. STEP 4 To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *. WIP310: STEP 1 In the Home screen, press the Select button to choose Settings. STEP 2 Press the Select button again to reach the Settings menu. STEP 3 Scroll to highlight Misc Settings and press the Select button. STEP 4 Press the left arrow to ensure that Enable Web Server is set to On. STEP 5 Press the Select button to save this setting. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 12