Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 182
Configuring Dial Plans, Digit Sequence, Function, EXAMPLE 1
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Configuring Dial Plans About Dial Plans 8 Digit Sequence Function For sequence substitution, use this format to indicate that certain dialed digits are replaced by other characters when the sequence is transmitted. The dialed digits can be zero or more characters. EXAMPLE 1: xxxxxxx When the user presses 8 followed by a seven-digit number, the system automatically replaces the dialed 8 with 1650. If the user dials 85550112, the system transmits 16505550112. EXAMPLE 2: xxxxxxxxxx In this example, no digits are replaced. When the user enters a 10-digit string of numbers, the number 1 is added at the beginning of the sequence. If the user dials 9725550112, the system transmits 19725550112 , (comma) For an intersequence tone, enter a comma between digits to play an "outside line" dial tone after a userentered sequence. EXAMPLE: 9, 1xxxxxxxxxx An "outside line" dial tone is sounded after the user presses 9, and the tone continues until the user presses 1. ! (exclamation point) For number barring, enter an exclamation point to prohibit a dial sequence pattern. EXAMPLE: 1900xxxxxxx! The system rejects any 11-digit sequence that begins with 1900. *xx Enter an asterisk to allow the user to enter a 2-digit star code. S0 or L0 For Interdigit Timer Master Override, enter S0 to reduce the short inter-digit timer to 0 seconds, or enter L0 to reduce the long inter-digit timer to 0 seconds. P For a pause, enter P followed by a number and a space. The duration of the pause is the specified number of seconds. This feature is typically used for implementation of a hot line and warm line, with 0 delay for the hot line and a non-zero delay for a warm line. EXAMPLE: P5 Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 171