Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 183

Configuring Dial Plans About Dial Plans 8 NOTE The Cisco SPA 9000 and the Cisco IP phones implicitly append the vertical code sequences entered in the regional parameter settings to the end of the dial plan. Likewise, if Enable_IP_Dialing is enabled, then IP dialing is also accepted on the associated line. Digit Sequence Examples The following examples show digit sequences that you can enter in a dial plan. In a complete dial plan entry, sequences are separated by a pipe character (|), and the entire set of sequences is enclosed within parentheses. EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) • Extensions on your system EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) [1-8]xx Allows a user dial any three-digit number that starts with the digits 1 through 8. If your system uses four-digit extensions, you would instead enter the following string: [1-8]xxx • Local dialing with seven-digit number EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]111) 9, xxxxxxx After a user presses 9, an external dial tone sounds. The user can enter any seven-digit number, as in a local call. • Local dialing with 3-digit area code and a 7-digit local number EXAMPLE: ( [1-8]xx | 9, xxxxxxx | 9, [2-9]xxxxxxxxx | 8, xxxxxxx | 9, 1 [2-9] xxxxxxxxx | 9, 1 900 xxxxxxx ! | 9, 011xxxxxx. | 0 | [49]11 ) Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 172