Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 239

Cisco SPA 500 Series and Wireless IP Phone Field Reference Regional Tab B Parameter SIT4 Tone MWI Dial Tone Cfwd Dial Tone Holding Tone Conference Tone Secure Call Indication Tone Page Tone Alert Tone System Beep Description This is an alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. Defaults to 985@-16,1371@-16,1777@-16;20(.380/0/ 1,.274/0/2,.380/0/3,0/4/0). Played instead of the Dial Tone when there are unheard messages in the caller's mailbox. Defaults to 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2). Played when all calls are forwarded. Defaults to 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2). Informs the local caller that the far end has placed the call on hold. Defaults to 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1). Played to all parties when a three-way conference call is in progress. Defaults to 350@-19;20(.1/.1/1,.1/9.7/1). Played when a call has been successfully switched to secure mode. It should be played only for a short while (less than 30 seconds) and at a reduced level (less than -19 dBm) so it does not interfere with the conversation. Defaults to 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2). Specifies the tone transmitted when the paging feature is enabled. Defaults to 600@-16;.3(.05/0.05/1). Played when an alert occurs. Defaults to 600@-19;.2(.05/0.05/1). Audible notification tone played when a system error occurs. Defaults to 600@-16;.1(.05/0.05/1). NOTE WIP310 and Cisco SPA 525G only. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 228