Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 194

Configuring the Cisco SPA 500S Attendant Console Setting Up the Cisco SPA 500S Attendant Console 9 Configuring the Cisco SPA 9000 for the Cisco SPA 500S You must still enable Computer Telephony Integration (CTI) on the Cisco SPA 9000 web UI, as shown in the following procedure: STEP 1 Connect to the web UI for the Cisco SPA 9000. STEP 2 Click Admin Login on the web UI page. STEP 3 If necessary, enter admin and your password, then Advanced. STEP 4 Click the SIP tab. STEP 5 In the SIP Parameters section, select yes from the CTI Enable drop-down list. STEP 6 Click Submit All Changes. Configuring the BroadSoft Server for the Cisco SPA 500S The BroadSoft server requires you to assign IP phone users to the Busy Lamp (BLF) Monitor Users List. The BroadSoft server sends updates on the status of each phone on this list to the Cisco SPA 500S, which subscribes for this service. To configure the BroadSoft server to support the Cisco SPA 500S: STEP 1 On the BroadSoft server, in the user profile used by the phone to register with the BroadSoft server, select Assign Services. STEP 2 On the Assign Services page, from the Available Services column, move Busy Lamp to the User Services column. STEP 3 Define the List URI used by the Cisco SPA 500S to register for BLF monitoring service with the BroadSoft server. This value must match the value entered following the sub = keyword (for example, cisco_list). Select the domain from the drop-down list to match the Unit Key. NOTE If you configure more than one monitored list on the BroadSoft server, use the vid= keyword in each unit/keyconfiguration script to specify the phone extension to use for each list. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 183