Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 270

Cisco SPA 500 Series and Wireless IP Phone Field Reference Phone Tab B Lightweight Directory Access Protocol (LDAP) Corporate Directory Search NOTE Does not apply to the WIP310. If using Active Directory with authentication set to MD5, you must first configure the following: • Click the System tab. In the Optional Network Configuration section, under Primary DNS, enter the IP address of the DNS server. • In the Optional Network Configuration section, under Domain, enter the LDAP domain. Parameter LDAP Dir Enable LDAP Corp Dir Name LDAP Server LDAP Auth Method Description Choose yes to enable LDAP. Enter a free-form text name, such as "Corporate Directory." Enter a fully qualified domain name or IP address of LDAP server, in the following format: nnn.nnn.nnn.nnn Select the authentication method that the LDAP server requires. Choices are: • None-No authentication is used between the client and the server. • Simple-The client sends its fully-qualified domain name and password to the LDAP server. May present security issues. • Digest-MD5-The LDAP server sends authentication options and a token to the client. The client returns an encrypted response that is decrypted and verified by the server. Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 259