Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 35

Configuring Lines and Extensions Configuring Lines 2 Configuring Call Pickup and Busy Lamp Field NOTE You must enable BLF to configure call pickup. In this example, the assistant Bob (extension 200) has an idle line (line 4) on his Cisco SPA 508G. He would like to be able to see if his supervisor Stephanie (extension 300) is on the phone, and pick up calls that are ringing at her extension. To configure this feature for Bob's Cisco SPA 508G: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login. STEP 3 Click advanced. STEP 4 Click the Phone tab. STEP 5 Find the first line to configure (line 4 in this example): a. From the Extension drop down list, choose Disabled. b. From the Share Call Appearance drop-down list, choose private. c. Enter the following string in the Extended Function field: fnc=blf+cp;sub=Stephanie@$PROXY;ext=300@$PROXY Using the following syntax: fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXY where: - fnc: function - blf: busy lamp field - cp: call pickup - sub: station name - ext or usr: extension or user (the usr and ext keywords are interchangeable) STEP 6 Click Submit All Changes. After the phone reboots, the phone (in this example) should show the following color LEDs for the monitored lines: Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 24