Linksys WIP310 SPA500 Series and WIP310 IP Phone Administration Guide - Page 61
Configuring Phone Features, Customizing Phone Softkeys
UPC - 745883580927
View all Linksys WIP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Customizing Cisco SPA and Wireless IP Phones Configuring Phone Features 3 Configuring Phone Features The following sections describe how to configure features on the phone such as softkeys, the message waiting indicator, ring tones, and audio features. Customizing Phone Softkeys NOTE This feature is unavailable on the Cisco SPA 500 Series IP Phones using SPCP. The Cisco SPA 500 Series IP phones have four softkeys on the screen that, when pressed, perform certain actions. (The Cisco SPA 501 does not have any softkeys.) The default softkeys (when the phone is in an idle state) are Redial, Directory, Call Forward, and Do Not Disturb. Other softkeys are available during specific call states (for example, if a call is on hold, the Resume softkey displays). You can customize the softkeys displayed on the phone. To program softkeys: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the Phone tab. STEP 4 In the Programmable Softkeys section, under Programmable Softkey Enable, choose yes. STEP 5 Edit the softkeys depending on the call state in which you want the softkey to display. See the following table for information about softkeys. STEP 6 Click Submit All Changes. In the Programmable Softkeys section, each phone state is displayed and the softkeys that are available to display during that state are listed. Each softkey is separated by a semicolon. Softkeys are shown in the format: softkeyname|[position] Cisco SPA 500 Series and WIP310 IP Phone Administration Guide 50