Oki MB471 Quick Start Guide - Page 120
Printers, Print & Scan, Applications, TextEdit, MB491PS, OKI MB491PCL
![]() |
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Printing from a Computer 14 Check that the name of your machine is displayed in [Printers] and [OKI MB491(PS)] or [OKI MB491(PCL)] is displayed. For Mac OS X 10.4.0 to 10.4.11 Memo ●● The procedure below uses Mac OS X 10.4.11 as an example. The description may be different depending on your OS. 1 Prepare a USB cable. A USB cable is not supplied with your machine. Prepare a USB 2.0 cable separately. Note 5 ●● If [OKI MB491(PS)] or [OKI MB491(PCL)] is not correctly displayed, click [-] to remove your machine from [Printers] and then redo the procedure from steps 11 to 13. 15 Close [Print & Scan] (Mac OS X 10.5 and 10.6: [Print & Fax]). 16 Remove "Software DVD-ROM" from the computer. The installation is complete. ◆◆Print a test page to check that the printer driver is successfully installed on the computer. 1 From the [Go] menu, select [Applications] > [TextEdit]. 2 Select the [File] menu > [Print]. 3 Select the name of your machine from [Printer]. 4 Click [Print]. Memo ●● Use a USB 2.0 Hi-Speed cable for a USB 2.0 HiSpeed connection. 2 Hold down the power switch for approximately one second to turn off the power. 3 Plug one end of the USB cable into the USB interface connector on the back of the machine. Printing - 120 -
![](/manual_guide/products/oki-data-mb451w-quick-start-guide-f260fd6/120.png)