Oki MB471 Quick Start Guide - Page 43
Automatic setup WPS, WPS-PBC, Running, Setting the IP address, SETTING, is selected
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3 Log in by entering administrator password of the device. Use , , , key to select letter and then press OK . Default administrator password is "aaaaaa". Faxing from a Computer (For Windows) 7 If [Yes] is selected in step 6, [Running pushbutton method...] is displayed in the screen. The message below will be displayed for about 5 seconds. Note 3 ●● Panel operations cannot be performed during WPS execution. ●● When [WPS connection successful] is displayed, this equipment is connected to the wireless LAN. Faxing (For MB451, MB451w, MB471, MB471w, MB491, MB491+, MB491+LP, ES4191 MFP, MPS4200mb, MPS4700mb only) 4 Check that [Automatic setup (WPS)] is selected, and then press the . Memo ●● If [Connection failed Timeout] is displayed, it is possible that the wireless AP of the connection destination could not be found within the time limit. Select [Yes] again in step 6 within 2 minutes of starting WPS push button for wireless AP. 5 Press the to select [WPS-PBC], and then press . OK 6 Press the to select [Yes], and then press . OK ●● If [Overlap] is displayed, WPS-push button is being executed on 2 or more wireless AP. Please wait for a short time and then retry. Setting the IP address: 1 Press the key on the operator panel. Memo ●● Start the WPS push button for wireless AP after clicking [Yes] in the confirmation screen. Alternatively, if WPS push button for wireless AP is started first, start the WPS push button on this equipment. ●● If [No] is selected, the screen returns to that from step 5. - 43 -