Oki MB471 Quick Start Guide - Page 90
For Mac OS X, Close, Local PC, Select A Connecting PC, From WSD, Connecting Methods
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Scanning Scanning to Local PC 8 When the balloon message saying that the installation is complete is displayed on the task bar, click the balloon to check the details, and click [Close]. 4 9 Press the key on the operator panel. 10 Press the to select [Local PC] and then press . OK For Mac OS X Overview Connecting Methods You can select either of the following connection methods: ●● Network Connection ●● USB Connection Product Requirements Your machine supports Mac OS X 10.6 to 10.8. Steps to Go To configure the Scan to Local PC function with Mac OS X, follow the 3 steps below: ●● "Step 1 Connecting Your Machine and Computer" P.91 ●● "Step 2 Installing a Scanner Driver" P.95 ●● "Step 3 Registering Your Computer in Network Scanner Setup Tool" P.96 Memo ●● For the network connection, you can skip step 1 if the IP address is already set on your machine. ●● You can skip step 2 if the scanner driver is already installed on your computer. ●● For the USB connection, skip step 3. 11 Check that [Select A Connecting PC] is selected, and press . OK 12 Press the to select [From WSD Scan], and press . OK 13 Check that the computer on which your machine has been installed is displayed as the destination PC. Note ●● If the machine's IP address is changed after the installation, uninstall the machine from the computer by following the same procedure as in "Step 2 Installing Your Machine to the Computer" P.89, and then reinstall it. - 90 -