Oki MB471 Quick Start Guide - Page 76
Procedure for Scan to Network PC, Network PC
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Scanning Scanning to Network PC Procedure for Scan to Network PC This section explains how to start Scan to Network PC. You need to configure the initial settings before using the Scan to Network PC function. Memo ●● The following procedure uses the factory default settings. 1 Press the key on the operator panel. 4 Note ●● Do not apply an excessive load to the document glass. Memo ●● The machine prioritizes the ADF when scanning documents. Be sure not to place documents on the ADF when you use the document glass. 3 Press the to select [Network PC] and then press . OK 2 Place your document in the ADF or on the document glass as below: ●● ADF Load documents face up with the top edge of the documents in first. Adjust the document guides to the width of your documents. ●● Document Glass Place the document face down and align its top edge to the upper-left corner of the glass. 4 Check that [Select Profile] is selected and then press . OK 5 Press the to select a profile and then press . OK 6 Press or . MONO COLOR Reference ●● To load a landscape document, refer to the User's Manual (Basic) > "1. Setup" > "Loading Paper and Documents" > "Documents" > "Loading Documents". ●● You can change the scan settings such as scan size and resolution as necessary. For details, refer to the User's Manual (Advanced) > "3. Scanning" > "Advanced Operations for Scanning, Internet Faxing and Scanning to Fax Server". Close the document glass cover gently. - 76 -