Oki MB471 Quick Start Guide - Page 87
SETTING, Wireless Setting, Automatic setup WPS, WPS-PBC, Running, Connecting using wireless LAN MB451w
![]() |
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Connecting using wireless LAN (MB451w, MB471w only): Use the WPS (push button) function to set the wireless LAN. For details on other methods for setting the wireless LAN, refer to the Configuration Guide. 1 Press the key on the operator panel. 2 Press the to select [Wireless Setting], and then press the . 3 Log in by entering administrator password of the device. Use , , , key to select letter and then press OK . Default administrator password is "aaaaaa". Scanning to Local PC 6 Press the to select [Yes], and then press . OK Memo ●● Start the WPS push button for wireless AP after clicking [Yes] in the confirmation screen. Alternatively, if WPS push button for wireless AP is started first, start the WPS push button on this equipment. ●● If [No] is selected, the screen returns to that from step 5. 4 7 If [Yes] is selected in step 6, [Running pushbutton method...] is displayed in the screen. Scanning The message below will be displayed for about 5 seconds. Note ●● Panel operations cannot be performed during WPS execution. ●● When [WPS connection successful] is displayed, this equipment is connected to the wireless LAN. 4 Check that [Automatic setup (WPS)] is selected, and then press the . Memo ●● If [Connection failed Timeout] is displayed, it is possible that the wireless AP of the connection destination could not be found within the time limit. Select [Yes] again in step 6 within 2 minutes of starting WPS push button for wireless AP. 5 Press the to select [WPS-PBC], and then press . OK ●● If [Overlap] is displayed, WPS-push button is being executed on 2 or more wireless AP. Please wait for a short time and then retry. - 87 -
![](/manual_guide/products/oki-data-mb451w-quick-start-guide-f260fd6/87.png)