Oki MB471 Quick Start Guide - Page 47
For USB Connection, Remove the Software DVD-ROM - oki printer driver
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
15 Check that the OKI MB491(FAX) icon is displayed. If a printer driver for the machine is already installed, the OKI MB491 icon may represent these drivers. In this case, right-click the OKI MB491 icon and select one of the menu items, and then check that the fax driver is displayed in the submenu. 16 Remove the "Software DVD-ROM" from the computer. The installation is complete. Faxing from a Computer (For Windows) For USB Connection Follow the procedure below to connect a USB cable and install a fax driver on your computer. Note ●● You must be logged in as an administrator to complete this procedure. Memo ●● You can skip this procedure if the fax driver is already installed on your computer. 1 Prepare a USB cable. 3 A USB cable is not supplied with your machine. Prepare a USB 2.0 cable separately. Memo ●● Use a USB 2.0 Hi-Speed cable for a USB 2.0 HiSpeed connection. 2 Hold down the power switch for approximately one second to turn off the power. Faxing (For MB451, MB451w, MB471, MB471w, MB491, MB491+, MB491+LP, ES4191 MFP, MPS4200mb, MPS4700mb only) 3 Plug one end of the USB cable into the USB interface connector on the back of the machine. 4 Turn on the computer. 5 Insert "Software DVD-ROM" into the computer. - 47 -