Oki MB471 Quick Start Guide - Page 15
Unpacking and Installing Your Machine, plastic bag from your machine.
![]() |
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Unpacking and Installing Your Machine This section explains how to unpack and install the machine. Note ●● The image drum is very delicate. Handle it carefully. ●● Do not expose the image drum to direct sunlight or very bright interior light (approximately more than 1500lux). Even under the normal interior light, do not leave it for more than 5 minutes. ●● Packaging and cushioning material are needed if transporting the machine. Do not throw them away. 1 Remove your machine from the box and remove cushioning materials and the plastic bag from your machine. The accessories (an AC cord, Telephone cable and the "Software DVD-ROM") are packed within the cushioning material (1). Note ●● Telephone cable is not supplied in some countries. Installing Your Machine 3 Remove the protection tapes (2) at the 1 top and sides of your machine, and take out cushioning materials (3). 2 3 2 4 Remove the protection tapes (4), and open the MP tray. Machine Setup 4 5 Remove the protection tape (5), and pull the paper up. 1 2 Lift your machine and place it where it is to be installed. Note ●● Do not open the scanner unit till step 9 is completed. 5 6 Close the MP tray. 7 Open the document glass cover. - 15 -
![](/manual_guide/products/oki-data-mb451w-quick-start-guide-f260fd6/15.png)