Oki MB471 Quick Start Guide - Page 64
Enter, Network, Setting, Manual, Reports, System, Information, For the confirmation message, check
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Scanning to Network PC b Repeat step a until all characters required are entered. c Press the and to select [Enter] and press . OK 4 Press the to select [Network Setting], and then press the . 9 Enter the DNS server and WINS server if needed. If it is not necessary to connect the DNS server or WINS server to the network, press OK until the pop-up message showing setting completion is displayed. 10 When the setup menu screen is displayed, press to complete the setup. 4 5 If setting the IP address manually, check that [Manual] is selected, and press . OK If obtaining the IP address automatically, press the to select [Auto], and press OK . Proceed to step 10. 6 Enter the IP address using the ten-key pad, and press . OK 11 For the confirmation message, check that [Yes] is selected and press . OK ◆◆Print the Network Information to check that the IP address and other network information are properly set. 1 Press the key on the operator panel. Scanning To move to the next box, press the . 7 Enter the subnet mask using the ten-key pad, and press . OK To move to the next box, press the . 8 Enter the default gateway address using the ten-key pad, and press . OK To move to the next box, press the . 2 Check that [Reports] is selected and press . OK 3 Press the to select [System] and press . OK 4 Press the to select [Network Information] and press . OK 5 For the confirmation message, check that [Yes] is selected and press . OK The Network Information is printed. - 64 -