Oki MB471 Quick Start Guide - Page 38
Faxing, Procedure for Fax
![]() |
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Faxing ●●Faxing This section explains the basic procedure for the Fax function. The Fax function enables you to scan documents and transmit them as faxes or receive faxes via a telephone line. Be sure to finish the initial setup before using this function. Procedure for Fax 3 This section explains how to transmit faxes. The following procedure uses the direct input method for specifying a destination. You need to configure the initial settings before using the Fax function. Note ●● Up to 40 digits can be entered for the destination fax number. Memo ●● You can load only A4, letter or legal size documents in the ADF, and only A4, letter or legal (MB491+LP/MPS4700mb only) size documents on the document glass. ●● You cannot load mixed size documents for faxing. ●● The following procedure uses the factory default settings. 1 Press the key on the operator panel. ●● Document Glass Place the document face down and align its top edge to the upper-left corner of the glass. Close the document glass cover gently. Note ●● Do not apply an excessive load to the document glass. Faxing (For MB451, MB451w, MB471, MB471w, MB491, MB491+, MB491+LP, ES4191 MFP, MPS4200mb, MPS4700mb only) 2 Place your document in the ADF or on the document glass as below: ●● ADF Load documents face up with the top edge of the documents in first. Memo ●● The machine prioritizes the ADF when scanning documents. Be sure not to place documents on the ADF when you use the document glass. 3 Check that [Fax] is selected and press OK to open the fax start screen. Adjust the document guides to the width of your documents. - 38 -
![](/manual_guide/products/oki-data-mb451w-quick-start-guide-f260fd6/38.png)