Oki MB471 Quick Start Guide - Page 53
Connecting using wireless LAN, MB451w, MB471w only, SETTING, Wireless Setting, Automatic setup WPS
View all Oki MB471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Connecting using wireless LAN (MB451w, MB471w only) Use the WPS (push button) function to set the wireless LAN. For details on other methods for setting the wireless LAN, refer to the Configuration Guide. 1 Press the key on the operator panel. 2 Press the to select [Wireless Setting], and then press the . 3 Log in by entering administrator password of the device. Use , , , key to select letter and then press OK . Default administrator password is "aaaaaa". Scanning to E-mail 6 Press the to select [Yes], and then press . OK Memo ●● Start the WPS push button for wireless AP after clicking [Yes] in the confirmation screen. Alternatively, if WPS push button for wireless AP is started first, start the WPS push button on this equipment. ●● If [No] is selected, the screen returns to that from step 5. 4 7 If [Yes] is selected in step 6, [Running pushbutton method...] is displayed in the screen. Scanning The message below will be displayed for about 5 seconds. Note ●● Panel operations cannot be performed during WPS execution. ●● When [WPS connection successful] is displayed, this equipment is connected to the wireless LAN. 4 Check that [Automatic setup (WPS)] is selected, and then press the . Memo ●● If [Connection failed Timeout] is displayed, it is possible that the wireless AP of the connection destination could not be found within the time limit. Select [Yes] again in step 6 within 2 minutes of starting WPS push button for wireless AP. 5 Press the to select [WPS-PBC], and then press . OK ●● If [Overlap] is displayed, WPS-push button is being executed on 2 or more wireless AP. Please wait for a short time and then retry. - 53 -